Lovely equus 2hsl float, suitable for big warmbloods (mine are 17 hh) and tows like a dream, only selling as i am upgrading to a 3 horse float built april 2010 fully galvanized chassis filled in a frame. strong and easy to wind swing up jockey wheel - australian made. floor joists are at 350mm (approx.) centres and to that heavy duty blackbutt hardwood armour ply (rated at f27) is teck screwed to the floor joists at 150mm intervals. stall walls are 1.6mm zincanneal sheeting glued and welded to the frame. sheeting is .75mm zincanneal in continuous lengths horizontally, thus eliminating unnecessary joins, and not using off cuts. sheeting is glued not riveted rubber is glued to the entire floor including the tailgate and the stall walls with four anti slip strips glued to the tailgate rubber. all rubber is sealed as the edges. the entire frame is etch primed before .75mm cladding is glued to the frame. axles are 45mm square with 4 drops, each one fitted with electric brakes as well as a breakaway system. heavy duty seven leaf eye slipper springs. the tailgate is fitted with gas struts.. the tailgate is 47 in height and is fitted with a step and employs stainless steel hinges. spring loaded over centre latches secure the tailgate. one recessed tie up on each side of the float. recessed handle(s) to the doors. light truck tyres with sunraysia mags. one centrally placed roof vent and sliding windows on each side. one quality twin fluro interior light. large tack box 1.05m high, with external access door, inside has bridle hooks and hanging rail head divider removable and swinging. removable and adjustable chest bars (2 heights). removable centre pole. the interior is fully padded. stall length is 66 internal height is 74. chequer plate to a height of 760mm around the front chequer plate also covers the full sized steps. l.e.d. lights are standard. storm cover on rear tare 1100kg gwar 2800kg in excellent condition, always shedded
Login